Recycled content applies to every major material stream, but each one behaves differently. Collection systems, quality requirements and the rules for counting recycled material are not the same for plastic, paper, glass, metals, textiles and wood. Use this overview to see the main points of each, then follow the links to go deeper.
Recycled plastic
Collected plastic waste is sorted, washed, shredded and re-melted into regranulate (recyclate). It is the focus of EU recycled-content targets for packaging. Food-contact use needs material from approved processes, which is why many mechanical recyclers and packers document origin and process carefully.
Recycled paper and board
Paper fibre can be recycled several times, but fibres shorten with each cycle, so mills blend recovered fibre with fresh fibre. Cardboard and many cartons already contain a high share of recovered fibre.
Recycled glass
Glass cullet is melted with raw materials to make new containers. Higher cullet use can reduce the energy needed in the furnace. Colour sorting matters, because mixed colours limit what the cullet can be used for.
Recycled metals
Aluminium and steel can be recycled without loss of basic material properties, and secondary metal is traded widely. Alloy control and traceability are the main quality questions.
Recycled textiles
Textile recycling is more complex because garments are often blends of fibres. Recycled content in textiles frequently comes from recycled PET bottles or from cutting waste, so always ask what the source is.
Recycled wood
Reclaimed wood and wood waste are used in particle board and other panels. Contamination by coatings and treatments determines which material can be reused.
Other recycled materials
Rubber from end-of-life tyres, recycled composites, electronic scrap and construction aggregates also carry recycled content claims. Each has its own standards, so use the same questions as above: what is the source, how much of the product is recycled, and what evidence supports it?
Comparing material streams
| Material | Key quality question | Typical evidence |
|---|---|---|
| Plastic | Polymer type, food-contact suitability, post-consumer share | Supplier declaration, chain-of-custody certificate |
| Paper and board | Recovered fibre share of the product | Mill declaration, fibre certification |
| Glass | Cullet share and colour | Producer batch records |
| Metals | Scrap type and alloy | Mill certificate |
| Textiles | Source of recycled fibre, blend share | Fibre standard certificate |
Always separate PCR and PIR
Whatever the material, find out whether the recycled share is post-consumer (from used products) or post-industrial (from manufacturing waste). Read PCR vs PIR, then calculate your figure with the recycled content calculator. Evidence requirements are covered in verification.
Return to the overview: what is Recyclatanteil?
