Recycled content comes from two different places, and the difference matters for claims, regulation and procurement. PCR is post-consumer recycled material. PIR is post-industrial (pre-consumer) recycled material.
Definitions
The international standard ISO 14021 on self-declared environmental claims defines recycled content using two categories. Pre-consumer material is diverted from the waste stream during a manufacturing process. It excludes material such as rework, regrind or scrap that is generated in a process and can be reclaimed within the same process that created it. Post-consumer material is generated by households or by commercial, industrial and institutional facilities as end users of a product that can no longer be used for its intended purpose, and includes returns from the distribution chain.
| PCR (post-consumer) | PIR (post-industrial) | |
|---|---|---|
| Source | Used products, such as collected bottles or packaging | Manufacturing off-cuts and scrap that leave the original process |
| Typical example | Bottles from household collection turned into regranulate | Trimmings from a converter sold to a recycler |
| Contamination | Usually higher, needs more sorting and washing | Usually cleaner and better known |
| Counts toward EU packaging targets | Yes, the PPWR targets refer to post-consumer plastic waste | Check the regulation text and its implementing rules |
Why the distinction matters
- Environmental meaning: PCR diverts used products from disposal. PIR often had a ready outlet anyway, so many buyers and rules put more weight on PCR.
- Regulation: the EU PPWR plastic recycled-content targets are framed around plastic recovered from post-consumer waste. See EU packaging rules and PPWR.
- Claims: saying “40% recycled” when only 5% is post-consumer can mislead. State the split.
- Procurement: specifications often demand a minimum PCR share rather than a total.
Worked example
A film uses 30 kg PCR, 10 kg PIR and 60 kg virgin material. Recycled content is 40% in total, but the PCR share is 30% and the PIR share 10%. If your customer requires 30% PCR, you meet it. If they require 35% PCR, you do not, even though the total is higher. Use the calculator to see both values.
What does not count as PIR
Scrap that never leaves the process, such as runner or trim material ground up and immediately fed back into the same line, is generally treated as part of the process rather than recycled content under ISO 14021. If you rely on this material, check the exact definition in your standard, regulation or customer contract.
Frequently asked questions
Is PCR better than PIR?
Neither is “better” in every sense, but PCR is generally the stricter and more valued category because it recovers material that was already used.
Can a product contain both?
Yes. Report each share separately and the total.
Where can I learn how to prove the split?
See recycled content verification.
Back to what Recyclatanteil means or browse recycled materials.
